PREPARATION OF IRON/CARBON MATERIAL FROM BIODIESEL WASTE FOR APPLICATION IN THE REMOVAL OF ORGANIC CONTAMINANTS. In this work, iron/carbon-based catalysts obtained from biodiesel residues, glycerin, were prepared. The composites were prepared by thermal carbonization of the glycerin polymer, from biodiesel residues, in the presence of iron salt. The materials obtained were characterized by adsorption/desorption of N2, scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy and thermogravimetric analysis. XRD analysis have shown the presence of hematite and magnetite. The methylene blue (MB) adsorption and oxidation tests reached 99% color removal in the presence of hydrogen peroxide. The steadystate spectra confirmed the MB oxidation by the reduction of the fluorescence intensity. Besides, it has high stability, with no active phase leaching, proving a heterogeneous oxidation process.

In this work, composites based on activated carbon/iron oxide (AC/Fe) were prepared in two different proportions (AC/Fe 5/1 and 1/1) and evaluated in the removal of the organic dye methylene blue (MB). Physical-chemical properties of the composites were determined by X-ray diffraction (XRD), adsorption/dessorption of N2 isotherm, temperature programmed reduction (TPR) and scanning electron microscopy (SEM). Results showed that goethite (α- FeOOH), with nanometer particle size, was formed over carbon surface for both composites. These materials showed high efficiency to remove MB from solution by combined adsorption and oxidation process. The AC/Fe 1/1 showed to be more active in (MB) oxidation then AC/Fe 5/1.

In this work were prepared composites of iron oxide and carbonaceous materials in two different weight proportions (Carbon/Fe 1/1 and 1/2). The physico-chemical properties of the composites were determined by temperature programmed reduction (TPR), adsorption/dessorption of N2, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and pulse titration H2. The XRD and XPS analysis showed a cubic iron oxide phase, identified as maghemite, formed over the carbon surface. The particle size of maghemite showed to be within 10-30 nm. Carbon/Fe 1/2 was the most active in MB removal kinetics and ESI-MS studies showed that MB removal by both composites leads to oxidized intermediates.

The black, green and sour coffee defect (PVA) contributes with 20% of the total coffee production. It should be separate from the normal coffee grains in order to improve the final quality of the beverage. In this way, the present work has the objective to use the PVA reject for the production of activated carbon. The activated carbon (CA) was prepared from PVA defect using zinc chloride as activating agent. The prepared material (CA PVA) was characterized and the adsorption tests were carried out using as organic models methylene blue (AM) and reactive red (VR). The CA PVA revealed to be more efficient in the removal of the organic contaminants compared to a commercial activated carbon.

This work describes novel materials based on pure iron oxide and iron oxide/niobia composite to produce a magnetic adsorbent. These materials were prepared with synthetic iron oxide and characterized by powder XRD, SEM, FTIR, TPR and Mössbauer spectroscopy. Results showed that the main iron oxides formed were goethite (aFeOOH) and maghemite (gFe2O3) with small particle size. The iron oxide and iron oxide/niobia composite showed high adsorption ability for organic compounds. The positive enthalpy indicated an endothermic adsorption process suggesting physical adsorption.

Coffee fruit processing is one of the most polluting activities in agriculture due to the large amount of waste generated in the process. In this work, coffee parchment was employed as precursor for the production of carbons activated with ZnCl2 (CAP). The material was characterized using N2 adsorption/desorption at 77 K, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The material showed a surface area of 521.6 m²g-1 and microporous structure. CAP was applied as adsorbent for the removal of methylene blue dye in aqueous medium. The adsorption capacity was found to be about 188.7 mg g-1.

Materials based on pure iron oxide and impregnated with niobia (Nb2O5) were prepared. Their catalytic activities were tested on the oxidation of compounds present in the wastewater from the processing of coffee berries. Particularly caffeine and catechol were tested. The oxidation reactions were carried out with the following systems (i) UV/H2O2, (ii) photo-Fenton and (iii) heterogeneous Fenton. All materials were characterized with X-ray diffraction, Mössbauer and infrared spectroscopy. Iron was mainly in the forms of goethite and maghemite. The oxidation kinetics were monitored by UV-vis and the oxidation products were monitored by mass spectrometry. The photo-Fenton reaction presented highest oxidation efficiency, removing 98% of all caffeine and catechol contents.

Neste trabalho, apresenta-se um novo material adsorvente, obtido a partir da pirólise de resíduos da erva-mate. O carvão resultante demonstrou elevada área superficial específica quando comparado com outros materiais pirolisados e elevada capacidade de remoção de contaminantes orgânicos de soluções aquosas. Os valores de área específica apresentados pelos materiais foram de 344, 191 e ~0,5 m² g-1, para o carvão Mate 1, Mate 2 e Mate 3, respectivamente. As isotermas de adsorção mostraram que os carvões apresentam potencial para utilização como adsorvente para compostos orgânicos, tais como: o corante têxtil vermelho reativo, o corante azul de metileno e para o herbicida atrazina, sendo que os máximos de adsorção utilizando o carvão Mate 1 foram de 16, 230 e 30 mg g-1, respectivamente.

In this work we present a new adsorbent material, obtained by maté waste pyrolisis. The resulting charcoal presented high specific area when compared with other pyrolized materials and also high capacity to remove organic contaminants from aqueous solution. The charcoal showed specific area of 344, 191 and ~0.3 m² g-1 for sample Mate 1, Mate 2 and Mate 3, respectively. According to the corresponding adsorption isotherm these materials present good adsorption capacity for reactive textile and methylene blue dyes and the herbicide atrazine. Adsorption maxima were respectively 16, 230 and 35 mg g-1 for such substances, when sample Mate 1 was used.

Nb-substituted goethites have been prepared and characterized by Mössbauer spectroscopy, XRD, SEM and BET surface area measurements. Mössbauer and XRD analyses suggested that Nb replaces Fe3+ in the structure with duplet formation. The insertion of Nb into the goethite structure caused a significant increase in the BET surface area of the material. The prepared alpha-Fe1-xNb xOOH was investigated for the H2O2 decomposition to O2 and for the Fenton reaction to oxidize the dye methylene blue. It was observed that the introduction of Nb in to goethite produced a strong increase in the activity of oxidation of the dye contaminant by H2O2.